As we know, the structural components carrying vertical loads, preventing deflection are known as Beams. Identification of Beam takes place by their method of support, length, material profile, and condition of equilibrium.

Carrying vertical loads, beams transfer them to supporting column or masonry moving them to the foundation.

Beams based on support are of two types:

1. Single Reinforced Beam:

Single Reinforced beam refers to the beam containing steel reinforcement only in tension zones.

In a single reinforced beam, the tension force is carried by the reinforcement while the compressive load is on the concrete that is caused by the beam’s deflection.

Reason for the usage of Single Reinforced Beam:

These beams are suitable when the moment of resistance of the balanced reinforced concrete beam of dimension b x d is Rbd2.

In the tensile zone of this beam, still is provided, which is suitable for both compression and tension.

It has limited moments of resistance.

DoubleReinforced Beam:

Double Reinforced beam refers to the beam in which steel bars are provided in zones of tension and compression.

It is suitable to use such beams in conditions where due to headroom limitations or architectural considerations, the size of the beam is limited.

Reason for the usage of Double Reinforced Beam:

• As it has steel in tension and compression zones, it reduces the section’s deflection, increasing the rotational capacity and flexibility.
• Compression steel also reduces long term deflection of beam.
• It is economical if compared to single reinforced beam.
• Needed when the face of member experiences an external load.
• Also practiced when the load is eccentric.
• Used whenchange is noticed in sign of the bending moment.

Differences between Single and Double Reinforced Beam